Skip to content

Foundation Repair in New Holland, PA

The limestone under New Holland does not give way evenly

Solution channels in the rock leave soft pockets beneath a footing. The wall above finds them, one diagonal crack at a time.

(800) 834-6584
  • 4.9 · 195 Lancaster reviews
  • Lifetime warranty
  • No money down
  • 24/7 emergency
A stabilized foundation wall, seen face-onElevation of a concrete block foundation wall carrying the floor framing above it, with earth below the footing. A red stair-step crack climbs the mortar joints on the left and is closed by a line of green injection ports following it. Three green carbon fiber straps run the full height of the wall, anchored by green plates at the joist and at the footing. At the right the footing has settled: a gold wedge marks the void under it, a red diagonal crack runs up the wall above, and a green helical pier with two helix plates is driven deep below the footing, with a green arrow showing the corner lifted back.Settled corner, underpinnedStair-step crack, injectedCarbon fiber straps, joist to footing
Foundation Repair in ZIP 17557 · New Holland Borough / Earl Twp · Lancaster County, PAOffice: 2348 Harrisburg Pike, Lancaster, PA 17601 · Mon–Sat 7AM–8PM

Foundation in New Holland

Limestone valley floor

Foundation problems around New Holland usually begin underneath the footing. The Earl Township limestone belt has had slightly acidic groundwater working at it for a very long time, and what that process leaves behind is a rock mass with channels and soft pockets running through it in no particular pattern.

A footing that spans one of those pockets has uneven support along its length. Masonry answers uneven support very predictably: a stair-step crack running diagonally through the mortar joints, widest at the end furthest from good bearing. That is the crack our estimator is usually standing in front of when he arrives at a New Holland property.

The plan starts with measurement. Width, offset, whether the two faces of the crack still line up, and whether anything has moved since it was last marked. Where bearing has genuinely been lost, helical or push piers take the load down to competent ground. Where the wall simply cracked and settled into its new position, injection and reinforcement close it and hold it closed. You get the measurements, the reasoning and a fixed price in writing before a crew is scheduled.

What we install in New Holland

Interior French drain tied into a sealed sump basin with a battery backup, because the volume shows up fast and all at once. Wall vapor barrier where the block has been wicking.

Most common call here

  • Water appears within an hour of a hard rain, then leaves just as fast
  • White mineral crust (efflorescence) on block walls
  • A single wet corner rather than an evenly damp floor
  • Depressions or soft spots in the yard near the foundation
Everything we do in New Holland

The actual scope

What a New Holland job includes

Every foundation repair we install in New Holland, PA follows the same checklist, and you get it in writing before the crew arrives. Bowing walls, stair-step cracks and settling corners are the foundation telling you the soil around it has won an argument. We stabilize the structure first, then deal with the water that caused it.

  • Carbon fiber and steel wall reinforcement
  • Push and helical pier underpinning
  • Structural crack injection
  • Stone foundation repointing
  • Settlement and heave correction

How a New Holland foundation job runs

Start to warranty

  1. Structural assessment and measurement

  2. Engineered repair plan

  3. Stabilize, then correct the drainage

  4. Lifetime warranty on the repair

Questions from around New Holland

Straight answers

Could there be a void under my footing, and how would anybody know?

It's a real possibility on the Earl Township limestone and the wall tells us. A stair-step crack that widens away from one point is the signature of lost bearing at that end. Where it matters we probe before writing a pier plan for a New Holland property.

What is the difference between push piers and helical piers?

Either can be right on a New Holland footing. Push piers use the weight of the house to drive to load-bearing depth; helicals are screwed in and can carry load without that mass. Heavier structures usually get push, lighter ones and additions usually get helical. The plan says which and why.

The crack is diagonal and wider at the top. What does that mean?

That the bottom of that end has dropped, so the wall is hinging. Widest at the top means the movement is settlement at the low corner. It tells us where the bearing was lost, which is exactly where the piers need to go.

Is a stair-step crack in New Holland always serious?

Not always. Plenty are old movement that finished years ago, and those are an injection and repointing job. What separates them is whether it's still moving, which we determine by measuring the crack and marking it.

How deep do piers go on this limestone?

Down to competent rock or dense bearing, which around here can be anywhere from eight feet to well past twenty depending on where the channels run. We drive until the load test says it's holding, so depth is an outcome of the load test, and we do not promise a number up front.

Get a real price on foundation repair in New Holland.

Free estimate, no money down, and a lifetime warranty that transfers when you sell the house.

(800) 834-6584